Your position: Home > Product center > AC/DC TIG

VECTOR Digital Welding machine AC/DC TIG V241 Plus Inverter ALU TIG ARC MMA STICK Electrode

Our Vector Digital welding machine device for challenging tasks. AC/DC TIG V241 Plus Inverter ALU TIG ARC MMA STICK Electrode DC TIG 200 A, Puls, MMA, . AC, TIG 200 A, TIG Puls, MMA/STICK 200 A, IGBT (Infineon)

Descript of VECTOR Digital Welding machine AC/DC TIG V241 Plus Inverter ALU TIG ARC MMA STICK Electrode

 A total solution of precise AC/DC TIG PLUS welding and plasma cutting machine.

AC/DC V241 is built on the base of the digital system, which offers precise, expert AC/DC TIG welding process. It?s a precise welding specialist that suits all welded materials. Modular design allows you to build the package that best suits your needs. Easy operation and full functions: From the control panel allowing fast adjustment of all necessary controls for DC, AC TIG welding with either HF or contact ignition. It?s also very convenient to store or call out the welding parameters from the memory channels by pressing the Job and Save button.

Important functions & device information at a glance

Precision Arc Performance:

♦ DC+/DC-: Improved TIG starting. Now starts DC(-) to maintain a sharp tungsten.

♦ Lift-Arc start provides AC or DC arc starting without the use of high frequency.

♦ Adjustable AC output frequency allows the operator to focus the arc minimizing the heat affected zone.

♦ Extended AC Balance Control helps maintain a pointed tungsten to direct the arc in the weld joint.

♦ Independent amplitude/amperage control allows EP and EN amperages to be set independently to precisely control heat input to the work and electrode.

♦ Multiple Waveshapes:

♦ Standard Squarewave for fast travel speeds and excellent puddle control,Sine wave for a traditional softer sounding arc,Triangular wave to reduce the heat input into the weld at low amperage.Soft squarewave for a soft buttery arc with maximum puddle control and good wetting action.

♦ Pilot Arc for superior arc performance and easy start.

♦ HF or Non-HF Arc ignition: reliable plasma arc initiation without high frequency.

♦ Continuous Output Control: focus the arc for different material thickness.

♦ Rapid Arc Restrike: fast cutting through gaps, even expanded metal.

♦ Powerful with heavy duty: 200A @50%.

♦ 10 channels memory capacity.

Technical specifications

Setting range for welding current10A-200A10A-200A10A-50A
Duty cycle at ambient temperature40 °C40 °C40 °C
Open circuit voltage59V59V236V
Mains Frequency50 Hz / 60 Hz50 Hz / 60 Hz50 Hz / 60 Hz
Mains fuses(slow-blow)1 X 16A
Mains Voltage(tolerances)1 x230 V (±15 %)
Max. connected load4.6kVA7.1kVA4.9kVA
Recommended generator power7.5kVA9.9kVA7.5kVA
cos φ0.930.930.93
Dimensions machine, LxWxH in mm
Protection classificationIP23IP23IP23
StandardsIEC 60 974-1

TIG welding with reproducible, electronic HF start
TIG lift arc welding without HF
Adjustable AC frequency between 50 Hz and 200 Hz
Non-latched/latched operation
Clearly structured operating panel, operating elements streamlined to feature the main TIG functions
Up-slope/down-slope adjustable
Adjustable gas pre-flows/post-flows
Accurate Pulse data with 9 program SAVE
Resettable adjustment of all welding function
Pilot or normal strike Arc available
Multichoice of remote controller
MMA welding
Antistick function
Adjustable hot start current and hot start time
Adjustable Arcforce
Plasma cutting
High mains voltage tolerance +15%to maintain stable work
3M power cable and 16A European adopter

Scope of delivery
TIG accessoriesTIG welding torch "WP-26" 4.5 meters
4 gas nozzles. Sizes: 4, 5, 6, 7
4 clamping sleeves. Size 1.6 and 2.4
4 clamping sleeve housing. Size 1.6 and 2.4
Torch cap - one short and one long each
miscellaneousGas fabric connection hose: 3 m
Ground cable 3 meters
Electrode holder 3 meters

Other devices from this product category